Friday 25 April 2014

Blog switchover

Posts and pages from the old SLiMSuite and SeqSuite blog have now been imported and this blog will take over as the main source of ongoing news, tips, documentation and updates.

Wednesday 23 April 2014

SLiMSuite 2014-04-22 now available

A new download of SLiMSuite (release 2014-04-22) is now available. As well as fixing the error, the download page and readme have had a slight makeover, which should make them load quicker.

As part of ongoing consolidation and documentation, SeqSuite has now been incorporated into in a single SLiMSuite download. (Previously, SLiMSuite was available as a reduced set of programs and SeqSuite had the full set.) The intention is to retire the SeqSuite moniker over the coming months, although the programs themselves will still be available.

The lastest release also features a new program, SLiMFarmer, for running (Q)SLiMFinder and SLiMProb batch jobs on parallel processors. SLiMFarmer is still under development and should hopefully work with other SLiMSuite programs too but has not yet been tested.

Other miscellaneous updates are listed below.

Updates since last release:

• comparimotif_V3: Updated from Version 3.10.
→ Version 3.10: Added forking.
→ Version 3.11: Added additional overlap/matchfix checks during basic comparison to try and speed up.
→ Version 3.12: Replaced deprecated sets.Set() with set().

• gablam: Updated from Version 2.11.
→ Version 2.12: Consolidated use of BLAST V2.

• haqesac: Updated from Version 1.9.
→ Version 1.10: Added exceptions for BLAST failure.

• picsi: Updated from Version 1.1.
→ Version 1.2: Updated to BUDAPEST 2.3 and rje_mascot.

• pingu_V4: Created.
→ Version 4.0: Initial Compilation based on code from SLiMBench and PINGU 3.9 (inherited as pingu_V3).
→ Version 4.1: Adding compilation of PPI databases using new rje_xref V1.1 and older objects from PINGU V3.
→ Version 4.2: Bug fixes for use of PPISource to create PPI databases.

• qslimfinder: Updated from Version 1.6.
→ Version 1.7: Fixed "MustHave=LIST" correction of motif space.

• seqmapper: Updated from Version 2.0.
→ Version 2.1: Added catching of failure to read input sequences. Removed 'Run' from GABLAM table.

• slimbench: Updated from Version 2.0.
→ Version 2.1: Fixed memsaver=T unless in development mode (dev=T). Removed old Assessment. Tested with simbench analysis.
→ Version 2.2: Replaced searchini=LIST with searchini=FILE and moved to SimBench commands.
→ Version 2.2: Modified the FN/TN and ResNum calculations. No longer rate TP in random data as OT.

• slimfarmer: Created.
→ Version 0.0: Initial Compilation.
→ Version 1.0: Functional version using rje_qsub and rje_iridis to fork out SLiMSuite runs.
→ Version 1.1: Updated to use rje_hpc.JobFarmer and incorporate main SLiMSuite farming within SLiMFarmer class.

• slimfinder: Updated from Version 4.5.
→ Version 4.6: Minor modification to seqocc=T function. !Experimental! Added main occurrence output and modified savespace.

• slimmutant: Created.
→ Version 0.0: Initial Compilation.
→ Version 1.0: Working version with standalone functionality.

• slimprob: Updated from Version 1.0.
→ Version 1.1: Tidied import commands.
→ Version 1.2: Increased extras=X levels. Adjusted maxsize=X assessment to be post-masking.

• ned_rankbydistribution: Updated from Version 1.1.
→ Version 1.2: Replaced depracated Set module.

• rje: Updated from Version 4.8.
→ Version 4.9: Added rje.slimsuite, which determines the slimsuite home directory from file path.
→ Version 4.10: Added osx=T/F option for Mac-specific running options.

• rje_blast_V2: Updated from Version 2.4.
→ Version 2.5: Minor modifications for SLiMCore UPC generation.
→ Version 2.6: Minor bug fixes.

• rje_db: Updated from Version 1.2.
→ Version 1.3: Minor modifications for SLiMCore FUPC development.
→ Version 1.4: Added list checking with addEmptyTable.

• rje_dismatrix_V2: Updated from Version 2.9.
→ Version 2.10: Minor modifications for SLiMCore UPC.

• rje_genemap: Updated from Version 1.4.
→ Version 1.5: Minor tweak of expected HGNC input following change to downloads.

• rje_hpc: Created.
→ Version 1.0: Initial Compilation based on rje_iridis V1.10.

• rje_iridis: Updated from Version 1.9.
→ Version 1.10: Modified freemem setting to run on Katana. Made rsh optional. Removed defunct IRIDIS3 option.

• rje_obj: Updated from Version 1.3.
→ Version 1.4: Added sourceDataFile() method from SLiMBench for wider use.
→ Version 1.5: Added 'basestr' and 'basefile' cmdlist types.
→ Version 1.6: Added osx=T/F option for Mac-specific running options.

• rje_qsub: Updated from Version 1.4.
→ Version 1.5: Added emailing of job stats after run. Added vmem limit.

• rje_seq: Updated from Version 3.17.
→ Version 3.18: Minor BLAST+ bug fixes. Added exceptions to readBLAST failure.

• rje_seqlist: Updated from Version 1.3.
→ Version 1.4: Added dna2prot reformat function.

• rje_slimcore: Updated from Version 1.12.
→ Version 1.13: Modified the savespace settings to reduce numbers of files. targz file now uses RunID not Build Info.
→ Version 1.14: Started adding code for Fragmented UPC (FUPC) clustering.

• rje_slimlist: Updated from Version 1.2.
→ Version 1.3: Added auto-download of ELM data.

• rje_uniprot: Updated from Version 3.14.
→ Version 3.14: Added dblist=LIST and dbsplit=T/F for additional DB link output control. Set unipath default to url.
→ Version 3.15: Added extraction of taxonomic groups. Add UniFormat to improve pure downloads.
→ Version 3.16: Added WBGene ID's from WormBase as one of the recognised DB XRef to parse.
→ Version 3.17: Efficiency tweak to URL-based extraction of acclist.
→ Version 3.18: Minor modification to database parsing.

• rje_xref: Updated from Version 1.0.
→ Version 1.1: Added output of ID lists to text files. Major reworking. Tested with HPRD and HGNC.

Monday 21 April 2014

Coming soon...

This blog will replace the current SeqSuite and SLiMSuite blog. For now, please see the existing blog.

Tuesday 8 April 2014

Missing file

There is a bug with the current software download, with a file missing from the libraries/ directory. The download will hopefully be updated soon but in the meantime please email richard.edwards[at] and I will send you the file.